DST-1000 Acid Purification System DST-1000 Acid Purification System The Savillex DST-1000 Acid Purification System is used to purify acids used in trace metals analysis by the process of sub-boiling distillation. The DST-1000 is a compact, integrated unit that is simple to use and safe to operate unattended in a fume hood. S000256 Máy chưng cất Axit Số lượng: 0 Cái

DST-1000 Acid Purification System

  • Giá bán: Liên hệ
  • The Savillex DST-1000 Acid Purification System is used to purify acids used in trace metals analysis by the process of sub-boiling distillation. The DST-1000 is a compact, integrated unit that is simple to use and safe to operate unattended in a fume hood.

  • Xem trên web nhà sản xuất

  •  

Nhà cung cấp
 
The Savillex DST-1000 Acid Purification System is used to purify acids used in trace metals analysis by the process of sub-boiling distillation. The DST-1000 is a compact, integrated unit that is simple to use and safe to operate unattended in a fume hood. It can purify up to 1 L of acid at a time, converting trace metal (1 ppb) grade to high purity (10 ppt) grade, and provides a significant cost savings to any trace metals lab. The DST-1000 can be used to purify HNO3, HCl and HF, producing 500 mL of high purity acid in approximately 12 hours. For very high throughput labs, a larger version (DST- 4000) is also available.

Design Features
The DST-1000 features a PFA reservoir/condenser vessel with the lower (reservoir) section surrounded by an electric heating mantle. All wetted parts are high purity PFA. Acid to be purified is added to the vessel via a
conveniently located front fill tube which fills the reservoir from the bottom. The acid level in the reservoir is displayed by the liquid level gauge on the fill tube. Power is supplied to the heating mantle by a variable temperature controller with three temperature settings: LO, MID and HI. The acid in the reservoir is gently heated and high purity acid vapor is generated. The acid vapor condenses on the walls of the upper part of the vessel (condenser) and is collected in a channel which drains into a 1000 mL Purillex™ PFA collection
bottle. The domed shape of the condenser allows for efficient air cooling and acid vapor condensation. No water cooling is needed, which greatly simplifies installation and also reduces waste. The vent assembly in the vessel and the vent in the bottle transfer closure allow air into the vessel as the acid is distilled, and allow displaced air out of the bottle as it fills. Both vents are fitted with PTFE membranes, which prevent airborne contamination from entering the system. The pressure equalization tube maintains even pressure throughout the system during the distillation process to prevent pressurization.
The production rate of high purity acid is dependent on the temperature setting used. A temperature setting of HI will produce acid at approximately 40 mL/hr. The temperature setting only affects the production rate and not the purity of the acid. The maximum acid temperature that can be generated by the heating element is well below the boiling point of the acid so there is no potential for contaminants to be carried over with the distillate. The low maximum temperature and integrated thermal fuse in the heating element also provides a high degree of safety during the distillation process. The lower temperature settings are useful when operating the DST-1000 unattended or for extended periods of time. The process can be stopped at any time if high purity acid is needed urgently. Otherwise, the heater should be manually switched off when the remaining acid volume in the chamber reaches 50-100 mL. After cooling, the residual acid is drained to waste.
The DST-1000 is extremely simple to install and with a footprint of only 36.5 cm x 20 cm and a height of 45 cm. The DST-1000 will fit into the smallest fume hoods. The controller is connected via a 3 m cord and is designed to be placed outside the fume hood.
System Components
The DST-1000 Acid Purification System comes complete with a controller, 1000 mL Purillex PFA collection bottle and a bottle bracket.
Specifications​
Feature Specification
Power Source (three-wire earth grounded only) 100, 115 or 230 VAC +/- 5%, 50/60 Hz
Power Supply 70 watt resistance heater
Power Cord Length 3 m (9.8 ft) DST-1000 unit to control box
2 m (6.6 ft) control box to outlet
Dimensions (footprint) Length: 36.5 cm (14.4 in)
Width: 20.0 cm (7.9 in)
Height: 45.0 cm (17.7 in)
Shipping Weight 7.25 kg (16 lbs)
Capacity 1000 mL
Acids That Can Be Purified by the DST-1000 HNO3, HCl and HF
Certification CE certified and RoHS compliant

Ordering Information
Description Part #      
DST-1000 100 VAC 525-1000-100
DST-1000 115 VAC 525-1000-115
DST-1000 230 VAC 525-1000-230
DST-1000 230 VAC (UK 3-pin fused plug) 525-1000-230UK                             


Optional Part
Polypropylene Spill Tray, 10” x 20” x 1-5/8” 730-0525                                            
723.01 KB
     

 


 

Sản phẩm cùng loại

DST-4000 Acid Purification System

DST-4000 Acid Purification System

Giá bán: Liên hệ

The Savillex DST-4000 Acid Purification System is used to purify acids used in trace metals analysis by the process of sub-boiling distillation. The DST-4000 is a fully automated, high throughput unit that is simple to use and safe to operate unattended in a fume hood.
 

Thống kê

  • Đang truy cập65
  • Hôm nay789
  • Tháng hiện tại14,905
  • Tổng lượt truy cập272,830

Nhà cung cấp

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây